Ultrasonic Hardness Tester | Ultrasonic Hardness Tester TIME 5630

TIME 5630 Ultrasonic Hardness Tester

TIME5630 Ultrasonic Hardness tester can nondestructively measure the metals and alloys with aminimum thickness of 3 mm. It can measure strip/plate workpiece, mold hardened
layer, blade hardened layer, tooth surface hardened layer, flange edge, wheel, turbine rotor, thin plate, shaft and pipe, container, knife edge, welding part, etc.

Nondestructive hardness tester for testing hardened layer and thin workpieces
-3.5-inch color LCD screen
-It indicates the battery status and alarms in low battery
-Conversion of common hardness sales (HV, HB, HRC, HRB)
-Hardness value calibration and delete calibration
-Select the tested material, mainly steel and cast steel. After calibration with the standard test block, it can measure alloy tool steel, special cast iron and non-ferrous metals
-Large memory: built-in 8G SD card.
-Free measurement in all directions, no compensation is needed.
-It can display the maximum value, minimum value, average value, standard deviation, measurement times, previous measurement values, etc.
-Upper/lower limits setting and alarm when out of the limits
-Rechargeable lithium ion battery, continuous working time is more than 30 hours
-Portable stand to enhance the measurement accuracy



2010 © Copyright PT. Digital Akurasi | Valid XHTML & CSS
Developed by